The unwinder ARG650 S is a compact and powerful unit, designed to unwind coils with a flange diameter of up to 650 mm. Due to the integrated cable storage, wire can be fed – with only a low back pull – into the manufacturing process. If required, the cable storage can additionally be charged with further weights. The large safety door allows a comfortable operation of the unit.
By means of a lift truck, the coil will be placed on the drive shaft and fixed manually with a clamping cone.
The clamping cones can be adjusted to different types of coils, depending on the customers requirements.
Equipment: Signal light ( operation, “end of material”, failure)
The ARG650 S design allows a placement of several units in one line. The cable storage can be moved within the unit. Therefore, two or more wire can be unwinded simultaneously.
| Drive motor: | three-phase motor |
| Speed: | up to 3 m/s |
| Length: | 970 mm |
| Depth: | 900 mm |
| Height: | 1600 mm |
| Storage capacity: | 4.0 m approx. |
| Coil size min.: | 300 x 400 mm |
| Coil size max.: | 650 x 400 mm |
| Discharche height: | 1090 mm |
| max. coil weight: | 100 kg |
| Speed control: | analogue sensor |
| Unit-weight: | 120 kg |
| Power-supply: | 230 V, 50-60 Hz |
